BMX Crank Spindles etc

Freshen up the mounting hardware on your spindle drive with a pair of Mission Spindle Bolts. Mainly built to replace worn or broken Mission Transit Cranks, though it will also work well with others.

Replacement spindle for Rant Bangin' 8 cranks.

Replacement 22mm spindle for Animal Akimbo cranks. ###section### Product Specs Rise: 22mm Bar Clamping Diameter: Chromoly Bar Clamping Diameter: TBC

Our very own range of Titanium products now available at Source BMX. Helping to keep the weight of your bike down to a minimum the Source BMX Titanium Sprocket Bolt is made from high-quality grade 5 titanium with an average 40% weight saving when compared to the steel alternative. The replacement Sprocket Bolt uses a metric thread that will fit most cranks, except for Profile & Odyssey Thunderbolt which use a different thread. When installing these on your bike please use adequate lubrication or anti-seize to prevent corrosion, seizing or cold welding. Weight: 6g Please note: These will not fit Profile cranks or Odyssey...

Replacement Odyssey crank bolt for twombolt and thunderbolt cranks. ###section### Product Specs Rise: N/A Bar Clamping Diameter: Chromoly Bar Clamping Diameter: TBC

Replacement spindle bolt pair for Wethepeople Logic 22mm cranks. ###section### Product Specs Rise: N/A Bar Clamping Diameter: Chromoly Bar Clamping Diameter: TBC

Titanium Spindle upgrade or replacement for Profile Column 22mm cranks. Made in the USA at profiles factory in Florida. This spindle is machined from aircraft grade titanium and is a must if you are looking to lighten you ride. Fits profile Column cranks and other 48spline 22mm cranks. Comes with Crmo Flush bolts and washers. Gun Drilled Hollow.  Diameter: 22mm Weight: 139g / 4.86oz ###section### Product Specs Rise: 22mm Bar Clamping Diameter: Titanium Bar Clamping Diameter: 139g / 4.86oz

Replacement Profile Flush bolts and matching washers for older Profile and Madera Cranks solid spindles. Made in the USA.

Replacement spindle bolt for BSD substance XL cranks. ###section### Product Specs Rise: N/A Bar Clamping Diameter: Chromoly Bar Clamping Diameter: TBC

Box One Sprocket Bolt kits include five 8.5mm front bolts, five 6mm front bolts and five 5mm rear nuts so they will fit just about any sprocket/crank combination, including those with threaded holes.

Our very own range of Titanium products now available at Source BMX. Helping to keep the weight of your bike down to a minimum the Source BMX Titanium 19mm Crank Spindle is made from high-quality grade 5 titanium with anverage 40% weight saving when compared to the steel alternative. This 19mm 48 spline Titanium crank spindle really saves some weight over your existing chromoly spindle, 140mm in length with M10 threads and of course pairs perfectly with our titanium crank spindle bolts. When installing these on your bike please use adequate lubrication or anti-seize to prevent corrosion, seizing or cold welding. Weight: 153g

The Mission 8-spline Crank Spindle is a direct replacement for the Transit Cranks and most other 8-spline cranks. Its chromoly construction ensures that the spindle is built to last. It comes with two spindle bolts included. ###section### Product Specs Crank Type: Drive Type: Spindle Diameter: 19mm Drive Side: Includes BB Bearings: Weight: 261g (9.21oz) ###shogun-image-section###

The Odyssey Thunderbolt Sprocket Bolt is made for mounting regular sprockets on Odyssey Thunderbolt Cranks.

Assorted bottom bracket spindle spacers for fine tuning crank arm offset, 2pcs x 0.6mm, 2pcs x 1.5mm, 2pcs x 3mm.

Our very own range of Titanium products now available at Source BMX. Helping to keep the weight of your bike down to a minimum the Source BMX Titanium Crank Spindle Bolts are made from high-quality grade 5 titanium with an average 40% weight saving when compared to the steel alternative. M10 x 33mm Crank bolts with a 24tpi thread to fit most M10 thread axles, paired perfectly with our Titanium 19mm Crank splindle. When installing these on your bike please use adequate lubrication or anti-seize to prevent corrosion, seizing or cold welding. Bolt size: M10 x 33m Weight per pair: 30g Sold in pairs.

Pack of five Chainring bolts. These bolts attach any chainring to BMX race crank arms. Made from tough Stainless steel with 5mm Allen wrench fittings for simple installation. Each bolt is 6mm long with a 5mm long back so will fit almost all crank/sprocket combinations.

Our very own range of Titanium products now available at Source BMX. Helping to keep the weight of your bike down to a minimum the Source BMX Titanium Race Chainring Bolts are made from high-quality grade 5 titanium with an average 40% weight saving when compared to steel option. Full set of 5 replacement chainring bolts, with 6mm front bolts and 5mm rear bolts. Will fit majority of chain rings. When installing these on your bike please use adequate lubrication or anti-seize to prevent corrosion, seizing or cold welding. Weight: 11g

Replacement Profile Flush bolts and matching washers for Profile and Madera Cranks. Made in the USA. Available in regular size for standard cr-mo axles and titanium axles or larger diameter size for the new hollow cr-mo Profile spindle. ###section### Product Specs Rise: N/A Bar Clamping Diameter: Multi Bar Clamping Diameter: TBC

Chromoly Spindle upgrade or replacement for Profile Column 22mm cranks. Made in the USA at profiles factory in Florida. This spindle is machined from 4340 Chromoly. Fits profile Column cranks and other 48 spline 22mm cranks. Comes with Crmo Flush bolts and washers. Gun Drilled Hollow.  Diameter: 22mm Weight: 227g/7.94 oz ###section### Product Specs Rise: 22mm Bar Clamping Diameter: Chromoly Bar Clamping Diameter: 227g/7.94 oz

Replacement pair of umbrella crank bolts from Jet BMX.

Replacement bolt for the Eclat Tibia crank

Replacement spindle bolt for 22mm Substance cranks.